1 Opening(s)
10.0 Year(s) To 11.0 Year(s)
6.00 LPA TO 7.00 LPA
Position Title: Foreman / Plant Floor Supervisor (Coal Washery)
Company: Bhatia Energy & Coal Benefication Pvt. Ltd. (Bilaspur, Chhattisgarh)
Department: Plant Operations & Maintenance / Coal Processing
Reporting To: Shift Incharge / Plant Manager
Floor Supervision & Execution: Oversee shop-floor activities across crushing, screening, heavy-media separation (HMS), and washing circuits to ensure smooth, continuous ...
- Plant Operations & Processing: Floor Supervision | Coal Beneficiation | Coal Washing Operations | Crushing & Screening | Heavy Media Separation (hms) | Raw Coal Processing | Plant Maintenance Coordination Machinery & Technical Skills: Heavy Industrial Equipment | Conveyor Belt Systems | Slurry Pumps | Vibrating Screens | Gearboxes & Bearings | Preventive & Breakdown Maintenance | Welding & Gas Cutting | Equipment Troubleshooting Safety & Compliance (she): Industrial Safety Standards | Lockout/tagout (loto) | Ppe Enforcement | Safety Audits & Compliance | Hazard Identification | Shop Floor Safety Protocols Shop Floor Leadership & Administration: Manpower Deployment | Shift Handover Logging | Crew Leadership | Downtime Minimization | Resource Management | Plant Logbook Maintenance
- Operational Execution: Plant Yield Optimization | Feed Rate Management | Washed Coal Quality Control | Dense Medium Circuit Monitoring | Thickener & Slurry Management | Plant Startup & Shutdown Procedures Mechanical & Technical Maintenance: Mechanical Troubleshooting | Pump Maintenance | Belt Tracking & Splicing | Bearing Grease & Lubrication Management | Root Cause Failure Analysis (rcfa) | Spare Parts Management Safety & Regulatory Compliance: Job Safety Analysis (jsa) | Incident Reporting | Workplace Hazard Mitigation | Environmental Compliance (dust/slurry) | Factory Safety Guidelines Supervisory & Soft Skills: Daily Shift Briefings | Contractor Supervision | On-floor Problem Solving | Inter-departmental Coordination | Productivity Tracking
1 Opening(s)
2.0 Year(s) To 5.0 Year(s)
2.40 LPA TO 4.20 LPA
Machine Setup & Alignment:
Align web and flange plates accurately on the machine bed using guide rollers and hydraulic clamping systems.
Set up welding heads, ground connections, and wire feeds for the Submerged Arc Welding (SAW) process.
Parameter Configuration & Operation:
Input and adjust operational parameters via the PLC / HMI panel (such as ...
- Core Job Role Keywords: Ptw Machine Operator (pull-through / Portal Type Welding) Saw Operator (submerged Arc Welding) Heavy Structural Welder / Automation Operator H-beam / I-beam Assembly & Welding Operator Technical & Operational Keywords: Submerged Arc Welding (saw) Process Plc / Hmi Touch Screen Machine Control Welding Parameters (voltage
- Amperage
- Travel Speed
- Wire Feed) Flux Recovery & Management Systems Hydraulic Clamping & Web-flange Alignment Automated Gantry Welding Lines Engineering & Quality Keywords: Structural Steel Fabrication Drawings & Symbols Weld Bead Profile Inspection & Penetration Check Pre-engineered Building (peb) Components Overhead Cranes & Heavy Material Handling Maintenance & Safety Keywords: Contact Tip & Nozzle Maintenance Slag & Flux Clearing Shop-floor Safety & Welding Ppe (auto-darkening Helmets
- Shields) Part 2: Job Description (jd) Company: Prakash Metallics Pvt. Ltd. (or Similar Heavy Steel / Peb Manufacturing Units) Functional Area: Production / Heavy Fabrication / Structural Steel Manufacturing Position: Ptw Machine Operator (pull-through Welding / Submerged Arc Welding) Reports To: Production Supervisor / Shift In-charge 1. Job Purpose To Set Up
- Operate
- And Monitor The Automated Pull-through Welding (ptw) / Portal Type Welding Machine Utilizing Submerged Arc Welding (saw) Technology To Produce High-strength Structural H-beams And I-beams Efficiently
- Ensuring Strict Compliance With Engineering Drawings
- Quality Standards
- And Safety Regulations. 2. Key Responsibilities & Duties Machine Setup & Alignment: Align Web And Flange Plates Accurately On The Machine Bed Using Guide Rollers And Hydraulic Clamping Systems. Set Up Welding Heads
- Ground Connections
- And Wire Feeds For The Submerged Arc Welding (saw) Process. Parameter Configuration & Operation: Input And Adjust Operational Parameters Via The Plc / Hmi Panel (such As Welding Current/amperage
- Arc Voltage
- And Pull-through Travel Speed) According To Material Thickness. Monitor The Continuous Automated Welding Run To Ensure Smooth
- Uniform Bead Formation Without Arc Breaks. Flux & Wire Management: Monitor And Manage The Continuous Wire Feed Mechanisms And Electrode Spools. Operate And Maintain The Flux Recovery System To Recycle Unspent Flux And Clear Slag Effectively. Quality & Inspection: Inspect Finished H/i-beams For Correct Alignment
- Dimensional Accuracy
- Lack Of Distortion
- And Flawless Weld Penetration/bead Profile. Coordinate With Quality Control Inspectors For Destructive/non-destructive Testing Preparation Where Required. Routine Maintenance & Housekeeping: Perform Routine Pre- And Post-shift Machine Inspections. Clean Flux Hoppers
- Clear Slag/debris
- And Replace Worn-out Contact Tips Or Welding Consumables Proactively. Safety Compliance: Follow All Industrial Safety Rules
- Use Mandated Welding Ppe (helmets
- Protective Clothing
- Heat-resistant Gloves
- Safety Boots)
- And Ensure A Hazard-free Work Zone
1 Opening(s)
4.0 Year(s) To 7.0 Year(s)
3.60 LPA TO 4.80 LPA
Description:
To advice & assist the factory management in the fulfillment of its obligations statutory, concerning prevention of personal injury & maintaining a safe working environment. These duties shall include the following namely:-To train & advise the concerned dept in planning and organizing measures necessary of the effective control of personal ...
1 Opening(s)
2.0 Year(s) To 5.0 Year(s)
2.00 LPA TO 2.40 LPA
To advice & assist the factory management in the fulfillment of its obligations statutory, concerning prevention of personal injury & maintaining a safe working environment. These duties shall include the following namely:-To train & advise the concerned dept in planning and organizing measures necessary of the effective control of personal ...
1 Opening(s)
10.0 Year(s) To 15.0 Year(s)
4.80 LPA TO 6.00 LPA
Company:-Steel & Power
preferred raipur local candidate
Job Description:-Urgent requirement Safety & -Environment Head (Sr Manager) for reputed Steel Industry at Raipur location.
Candidate should have Experience in Steel Industry as Evironment Manager Positon.
Determinations of Environmental Compliance2. To operate & maintain Environmental Laboratory as per NABL requirements3. Environmental Monitoring,4. Online (Real time) monitoring ...
2 Opening(s)
2.0 Year(s) To 5.0 Year(s)
2.16 LPA TO 3.00 LPA
A Fireman in a steel manufacturing company is a specialized industrial firefighter responsible for preventing, detecting, and extinguishing fires within a high-risk environment. They perform emergency response, operate heavy firefighting apparatus, and conduct routine safety checks on machinery, furnaces, and chemical storage areas to minimize damage to life and equipment.
Key Responsibilities ...
1 Opening(s)
3.0 Year(s) To 5.0 Year(s)
2.40 LPA TO 3.00 LPA
A Female HR Officer in a fabrication plant manages the full employee lifecycle, focusing on recruitment, statutory compliance (Factories Act, PF, ESI), payroll, and industrial relations. The role involves acting as a bridge between management and the shopfloor workforce to maintain a productive, safe, and harmonious environment.
Key Responsibilities
Recruitment & Onboarding: Sourcing, interviewing, ...
1 Opening(s)
2.0 Year(s) To 3.0 Year(s)
1.20 LPA TO 1.44 LPA
A Steel Industry Helper provides essential, hands-on support to machine operators, mechanics, and technicians. Key duties include transporting raw materials, assisting with routine equipment maintenance, handling tools, and ensuring the shop floor remains clean, organized, and compliant with plant safety protocols.
Core Responsibilities
Operational Assistance: Support technicians and operators during production runs ...
1 Opening(s)
10.0 Year(s) To 15.0 Year(s)
3.00 LPA TO 4.00 LPA
Job Title: Mechanical Maintenance Cine Manager Department: Mechanical Maintenance Industry: Steel Plant / Manufacturing Industry
Job Description: The Mechanical Maintenance Cine Manager is responsible for planning, coordinating, and supervising mechanical maintenance activities of plant machinery and equipment. The role includes preventive and breakdown maintenance, inspection and troubleshooting of mechanical systems, monitoring ...
- Mechanical Maintenance Manager
- Mechanical Maintenance
- Preventive Maintenance
- Breakdown Maintenance
- Corrective Maintenance
- Industrial Machinery Maintenance
- Plant Maintenance
- Steel Plant Maintenance
- Mechanical Troubleshooting
- Root Cause Analysis
- Equipment Inspection
- Conveyor Maintenance
- Gearbox Maintenance
- Pump Maintenance
- Hydraulic Systems
- Pneumatic Systems
- Bearing Maintenance
- Crane Maintenance
- Welding And Fabrication
- Shutdown Planning
- Maintenance Scheduling
- Spare Parts Management
- Equipment Reliability
- Downtime Reduction
- Maintenance Team Management
- Production Coordination
- Safety Compliance
- Sop Implementation
- Maintenance Planning
- Mechanical Engineering
- Plant Equipment Maintenance.
1 Opening(s)
10.0 Year(s) To 15.0 Year(s)
3.60 LPA TO 4.20 LPA
A Senior Electrician in steel manufacturing installs, maintains, and repairs high-voltage industrial systems (e.g., induction furnaces, rolling mills, overhead cranes). Core duties include minimizing production downtime through preventive maintenance, troubleshooting PLC and AC/DC drives, and enforcing strict electrical safety standards like Lockout/Tagout (LOTO). [1, 2, 3]
Key Responsibilities & Duties
Maintenance & ...