1 Opening(s)
4.0 Year(s) To 5.0 Year(s)
7.20 LPA TO 12.00 LPA
The Quality Engineer is responsible for ensuring that products and processes meet established quality standards by identifying quality gaps, conducting root cause analysis, and implementing corrective and preventive actions (CAPA). The role involves continuous improvement, inspection processes, documentation, and ensuring compliance with industry and customer standards (e.g., ISO, IATF).
🧪 Key ...
1 Opening(s)
3.0 Year(s) To 5.0 Year(s)
2.40 LPA TO 3.00 LPA
A Turbine Engineer in a steel manufacturing company oversees the safe, efficient operation and maintenance of power plant turbines (usually steam>25 MW) to ensure consistent, uninterrupted power to steel production processes. They monitor DCS, manage startups/shutdowns, perform troubleshooting, and ensure compliance with safety protocols.
Key Responsibilities:
Operational Control: Monitor turbine parameters (speed, pressure, temperature) ...
1 Opening(s)
10.0 Year(s) To 15.0 Year(s)
15.00 LPA TO 25.00 LPA
Position Title: Manager - Quality Control (QC) / Head - QA/QC
Department: Quality Assurance & Quality Control (QA/QC)
Location: Raipur, Chhattisgarh (or plant site)
Reporting To: Head of Operations / Plant Head / Corporate Quality Head
Mill-Floor Quality & Process Inspection:
Monitor hot rolling processes, dimensional accuracy, and surface finish of rolled structural profiles (angles, ...
- 🔬 Core Quality & Testing Keywords Qa/qc Management & Quality Assurance / Quality Control Metallurgical Testing & Chemical Composition Analysis (spectrometer) Mechanical Testing (tensile Strength
- Yield Strength
- Elongation
- Bend/rebend Tests) Universal Testing Machine (utm) & Metrology Dimensional Accuracy & Tolerance Inspection (angles
- Channels
- Beams
- Tmt Bars) Rolling Defect Analysis & Root Cause Analysis (rca) 📜 Standards
- Compliance & Certifications Keywords Bis Standards (bureau Of Indian Standards) & Astm / Iso / Is Codes Iso 9001 Quality Management System (qms) Third-party Inspection (tpi) Coordination (sgs
- Bureau Veritas
- Rites) Non-destructive Testing (ndt) (ultrasonic Testing
- Magnetic Particle Inspection) Capa (corrective And Preventive Action) & Non-conformance Reports (ncr) ⚙️ Plant & Mill Process Keywords Hot Rolling Mill Quality Control Billet & Raw Material Inspection Laboratory Management & Equipment Calibration Erp Systems (sap Qm Module - Quality Management) Six Sigma / Lean Quality Tools 👥 Leadership & Management Keywords Quality Manager / Head - Qa/qc / Qc In-charge Team Leadership & Shift Qc Management Customer Audits & Vendor Quality Assessment
1 Opening(s)
3.0 Year(s) To 4.0 Year(s)
1.80 LPA TO 2.40 LPA
A Technical Services Engineer (Bearings) or Technical Support Specialist in the bearings industry provides engineering expertise to customers, sales teams, and maintenance staff to ensure optimal performance, selection, and maintenance of bearing products. This role combines technical knowledge of rotating equipment, tribology, and mechanical engineering to solve, troubleshoot, and optimize bearing ...
1 Opening(s)
20.0 Year(s) To 25.0 Year(s)
18.00 LPA TO 22.00 LPA
Quality Head (Steel Company)
Position: Quality Head Industry: Steel / Metal Manufacturing Experience: 18-20+ years (preferably in steel plants)
🔧 Key Responsibilities:
Lead overall Quality Assurance (QA) and Quality Control (QC) functions in steel production
Ensure compliance with ISO 9001, ISO 14001, and other applicable standards
Monitor raw material quality (iron ore, scrap, alloys) and finished ...
1 Opening(s)
15.0 Year(s) To 25.0 Year(s)
18.00 LPA TO 22.00 LPA
A General Manager (GM) of Mechanical Maintenance in a Ferro Alloy/Steel Manufacturing Company is a senior leadership position responsible for the total reliability, maintenance, and technical efficiency of high-temperature furnace plants and auxiliary equipment. The primary goal is to ensure maximum equipment uptime, optimize production, and maintain strict safety standards for ...
1 Opening(s)
3.0 Year(s) To 6.0 Year(s)
3.50 LPA TO 5.50 LPA
Job Title: Safety In-charge (Ex-Army)
Department: Health, Safety & Environment (HSE)
Industry Type: Heavy Engineering / Iron & Steel / Railway Components Manufacturing
Location: Raipur / Chhattisgarh Industrial Area
Statutory & Regulatory Compliance: Ensure strict adherence to the Factories Act, State Factory Rules, and local safety directorate guidelines. Maintain all mandatory safety registers and ...
- Statutory & Regulatory Compliance: Ensure Strict Adherence To The Factories Act
- State Factory Rules
- And Local Safety Directorate Guidelines. Maintain All Mandatory Safety Registers And Documentation. Shop Floor Safety Oversight: Monitor Daily Operations Across Heavy Structural Fabrication Yards
- Welding Zones
- Material Handling
- And High-tonnage Crane/rigging Movements. Hazard Control & Risk Assessment: Conduct Regular Hazard Identification & Risk Assessment (hira)
- Job Safety Analysis (jsa)
- And Implement Preventive Engineering Controls. Training & Drills: Lead Daily/weekly Safety Briefing Sessions
- Toolbox Talks
- And Periodic Mock Drills (fire Fighting
- Structural Collapse
- Medical Emergency). Incident Investigation: Lead Root-cause Analysis (rca) For Any Near-misses
- Injuries
- Or Property Damage Incidents
- And Formulate Corrective And Preventive Action (capa) Plans. Ppe & Safety Audits: Enforce Strict Utilization Of Personal Protective Equipment (ppe) And Execute Internal Safety Audits To Identify And Rectify Workplace Hazards Proactively.
1 Opening(s)
5.0 Year(s) To 10.0 Year(s)
4.80 LPA TO 7.20 LPA
A Deputy Manager - Quality in a chains manufacturing company (such as industrial, automotive, or conveyor chains) is responsible for upholding stringent quality standards for raw materials, in-process production, and finished products. The role focuses on preventing defects, implementing QMS (IATF 16949/ISO), and driving continuous improvement (Kaizen/Six Sigma).
Core Responsibilities:
Supplier Quality Management ...
1 Opening(s)
1.0 Year(s) To 2.0 Year(s)
2.28 LPA TO 2.64 LPA
Safety Compliance & Audits: Regularly inspect plant machinery, shop floors, and operations to ensure compliance with factory safety acts, OSHA/local statutory rules, and company EHS guidelines.
Hazard Identification & Risk Assessment (HIZA): Identify potential workplace hazards, evaluate risks, and recommend preventive or corrective control measures.
Permit-to-Work System: Manage and monitor safety permits ...
- 1. Job Titles & Role Keywords Safety Officer Ehs Officer (environment
- Health & Safety) Hse Engineer Plant Safety Supervisor Safety Inspector Industrial Safety Specialist Fire & Safety Officer 2. Core Technical & Operational Skills Hazard Identification And Risk Assessment (hira) Job Safety Analysis (jsa) Permit-to-work (ptw) System Incident Investigation & Root Cause Analysis (rca) Safety Audits & Inspections Toolbox Talks & Safety Briefings Emergency Preparedness & Mock Drills Ppe (personal Protective Equipment) Management Occupational Health & Safety (ohs) 3. High-risk Operations & Safety Domains Hot Work Safety Working At Heights Confined Space Entry Electrical Safety Fire Fighting & Prevention Lifting & Rigging Safety Chemical / Material Handling Safety
1 Opening(s)
15.0 Year(s) To 25.0 Year(s)
18.00 LPA TO 22.00 LPA
A General Manager (GM) of Mechanical Maintenance for a Sponge Iron Division (SID) ensures 100% availability of kilns, coolers, and raw material handling equipment. This senior leadership role entails strategic planning of preventive/shutdown maintenance, budget control, managing breakdown repairs, ensuring safety compliance, and improving plant performance in heavy manufacturing environments.
Key Responsibilities ...